Hydroflume replaces traditional irrigation systems. In traditional irrigation systems, we have scattered water. A part of it is due to water penetration into the soil and some of it is lost due to evaporation. When the irrigation is finished, all the water in the irrigation system is lost. it goes and is wasted and a muddy barrier remains. But in Hydroflume irrigation, all the water is used and hydroflume irrigation occupies a smaller area than streams in the field and causes an increase in the cultivated area and Considering that the water moves in a closed path, it is not possible to transfer weed seeds inside the field and grow them.
Hydroflume is a low pressure irrigation method. For this reason, it is necessary to select the appropriate size of the control pipe based on the pressure. For this purpose, the amount of incoming water in liters per second, the length of the path, the slope of the land and the amount of dynamic pressure drop. Attention. You can contact our experts to ensure your right choice.
With Hydroflume, you can save up to 40% in water consumption.
Hydroflume can be used for all types of cultivation (rows, rows).
Hydroflume can be used in 6 seasons of cultivation, and after that, it can be used in corners or sold as waste.
Hydroflume water extraction is done by connecting to an irrigation pool or an iron tank such as a barrel or the like, or canals and streams. It is preferable to avoid directly connecting the hydroflume to water pumps. Hydroflum to the pump, a piece of open-bottomed iron pipe with the diameter of the pump pipe, at a height proportional to the working pressure of the Hydroflume, should be installed vertically to control the pressure applied to the hydroflume.
Due to the use of high-quality and first-class materials, Hydroflume is sold by the meter.
If there is a difference in height, a suitable support should be created by pouring some soil under the Hydroflume. In the paths that have a transverse slope, in order to prevent the Hydroflume from rolling, place it in a groove approximately 10 cm deep.
Each roll of Hydroflome is 100 meters. To connect hydroflome rolls to each other, one connection and two fasteners are used.
It is possible to make tees and intersections by welding several connections to an iron tank such as a barrel and the like, and control the passage and distribution of water by using the end clamp.
Hydroflume is used for water transfer and irrigation. In irrigation with Hydroflume, an easy method for irrigation can be achieved by installing a valve. Hydroflume valves are screw and sliding.